Partially re-install cross-pin (lower pin) from left. Long straight leg down, and against left wall of open channel (to go under cross-pin) If wrong (upper) pin in handle is removed and the sear spring is accidentally released and falls out of gun: (These are the normal checks you would perform after any routine cleaning of your pistol.) You will find normal function checks at the end of the install procedure will prove installation to be okay. Then, just finish the install according to the instructions below. Just push the lower leg of that spring back down, and reinsert the lower cross-pin (from the left side of the pistol) back into its original position over that spring, as it was originally.ī. (That spring is held, wrapped around the sear spring post, and it cannot become disoriented or dislodged. Recovery procedure if you accidently retract the Lower Cross-Pin too much, releasing the spring. Some customers with very old pistols report having to use a pin punch and small hammer or wood mallet to nudge cross-pin free to begin.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |